Luxury Swing Gate Turnstile for Hotel Lobbies and High-End Executive Office Entrances

Measured test data

Luxury Swing Gate Turnstile for Hotel Lobbies and High-End Executive Office Entrances. Test condition: the unit fitted with a tripod arm rotating through 90°, rated supply voltage, 25 °C ambient, 100 consecutive open/close cycles. Measured value: Passage time 0.5 s to 1 s per person; throughput 30 to 40 passages per minute, up to 3,000 cycles per day. Comparison baseline: A conventional tripod turnstile of the same class allows 20 to 25 passages per minute and does not integrate facial recognition.

Luxury Swing Gate Turnstile for Hotel Lobbies and High-End Executive Office Entrances. Test condition: Continuous cycling at rated load on the Baroxon test rig, 25 °C, maintenance performed per the manual. Measured value: MCBF 8 million cycles; mean time to repair under 30 minutes. Comparison baseline: Brushed-motor turnstiles of the same class are commonly specified at around 2 million cycles.

Luxury Swing Gate Turnstile for Hotel Lobbies and High-End Executive Office Entrances. Test condition: Idle state, turnstile powered, controller networked, measured over 24 h at 25 °C. Measured value: Power draw of 50 W peak and under 3 W standby. Comparison baseline: Conventional turnstile controllers draw roughly 8 W to 15 W in standby.

Luxury Swing Gate Turnstile for Hotel Lobbies and High-End Executive Office Entrances. Test condition: IEC 60529 dust chamber and water-jet test on the sealed cabinet and the drive unit. Measured value: Protection class IP65. Comparison baseline: Indoor-only access hardware is typically rated IP42 and is not specified for exposed outdoor lanes.